Hardware information
|
Standard |
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at |
|
Network Media |
10BASE-T: UTP category 3,4,5 cable (≤100m) 100BASE-TX: UTP category 5,5e cable (≤100m) 1000BASE-T: UTP category 5e,6 cable(≤100m) 1000BASE-X: MMF or SMF SFP module(Optional) |
|
LED |
Power ,SYS, PoE, 10/100M,1000M |
|
MAC Address Table |
4K, Auto-learning, Auto-aging |
|
Transfer mode |
Store-and-Forward |
|
Maximum packet length |
1536 Byte |
|
Switching Capacity |
5.6G |
|
Dimensions (L *W*H) |
330 *232 *45 mm |
|
Fan |
Fanless |
|
Power Input |
AC: 100~240V, 50/60Hz |
|
PoE(Power Over Ethernet) |
|
|
PoE port |
Port1~8 |
|
PoE Power on RJ45 |
Mode A 1/2(+),3/6(-) |
|
PoE Power Output |
Max.30W |
|
PoE Power Budget |
100W |
|
Environment |
|
|
Operating Temperature |
0°C ~40 °C(32 °F~104°F) |
|
Storage Temperature |
-40 °C ~70 °C(-40 °F~158°F) |
|
Operating Humidity |
10% ~ 90% non-condensing |
|
Storage Humidity |
5% ~ 90% non-condensing |
|
Software Function |
|
|
Port Configuration |
enable/disable, Automatic negotiation , 802.3x(Flow control )and (Back pressure ), Port Statistics, Port Mirroring，Bandwidth Control, Broadcast Storm Control |
|
Port Trunking |
Supports up to 2 Trunk groups |
|
Spanning Tree Protocol |
STP (802.1d),RSTP (802.1w) |
|
Multicast |
IGMPV1/V2 |
|
VLAN |
802.1q, Tag Base VLAN |
|
QoS |
2 priority queues
802.1p CoS/DSCP priority |
|
System Configuration |
HTTP/Telnet, SNMP trap, Firmware upgrade by TFTP/HTTP Backup/Recovery and NTP Setting |
|
DHCP relay agent |
DHCP Client,DHCP Relay / Option 82 |
|
PoE power control |
PoE status PoE Setting PoE Power Delay PoE Scheduling |
Description
OMY-ES312PM provides 8*10/100Mbps Fast Ethernet Ports that supports 802.3at/af compliant PoE, powerful and flexible enough for users to deploy wireless access points or IP-based network surveillance cameras. the PoE Switch also provide two Gigabit Ethernet ports, either TP or SFP per port. The two Gigabit ports either can be 1000Base-T for
10/100/1000Mbps or 1000Base-SX/LX through SFP interfaces.
OMY-ES312PM is web smart switch, and can be configured by web based interface. Including administrator, port management, PoE Setting, VLAN setting, each port statistics, trunking setting, QoS setting, security filter, configuration/ backup/recovery, and so on.
With all these advanced features, the Gigabit Smart PoE Switch is an ideal choice for small and medium business networking.
Features
Interface information
- 8*10/100Mbps RJ45 Ports
- 2*Gigabit TP/SFP Combo Ports
- 8 PSE Ports (Port1~8)
PoE (Power over Ethernet)
- Complies with IEEE802.3af/at Power over Ethernet
- Supports PoE Power up to 30W for each PoE port
- Auto detect power device
- Remote power and Data feeding up to100m
- PoE power Disable/Enable and PoE power consumption monitoring by management interface
Switch
- Flow Control for Full Duplex operation and back pressure for Half Duplex Operation
- 4K MAC address, automatic address learning and address aging
- Remote Web interface for switch management and setup
- Support port mirroring, trunking, Bandwidth Control, Broadcast Storm Control
- Support QoS, VLAN, STP
PoE Features
OMY-ES312PM can provide up to 30Watts of power to attached devices, such as VoIP phones, wireless access points, surveillance cameras etc, all over existing cat. 5cables. The switch eliminates the need for individual power sources for devices in the network, saving on costs for power cables and avoiding power outlet availability issues.
Application
OMY-ES312PM providing 8-Port PoE in-line power interfaces , and can easily build a power centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the power socket limitation, It makes the installation of cameras more easily and efficiently.
