|
Standard |
IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at |
|
Network Media(Cable) |
10BASE-T: UTP category 3,4,5 cable (≤100m) 100BASE-TX: UTP category 5,5e cable (≤100m) |
|
LED |
Power (Green) PoE (Orange) LINK/ACT（Green） |
|
LCD Display |
Support |
|
MAC Address Table |
8K, Auto-learning, Auto-aging |
|
Transfer mode |
Store-and-Forward |
|
Maximum packet length |
2KB |
|
Switching Capacity |
3.2G |
|
Dimensions (L*W*H) |
440*232*45 mm |
|
Fan |
Fanless |
|
Power Input |
AC: 100~240V, 50/60Hz |
|
Power Output |
DC: 55V/4.5A, 55V/5.6A(Optional) |
|
PoE(Power Over Ethernet) |
|
|
PoE port |
Port1~16 |
|
PoE Power on RJ45 |
Mode A 1/2(+),3/6(-) |
|
PoE Power Output |
Voltage: 55V DC Power: 32W(Max) |
|
PoE Power Budget |
240W/300W (According to the power) |
|
Environmental |
|
|
Operating Temperature |
0°C ~40 °C(32 °F~104°F) |
|
Storage Temperature |
-40 °C ~70 °C(-40 °F~158°F) |
|
Operating Humidity |
10% ~ 90% non-condensing |
|
Storage Humidity |
5% ~ 90% non-condensing |
Description
OMY-ES316PV has the function of LCD and PoE . It contains 16 RJ45 ports and 1~16 support PoE functions , The PoE ports can automatically detect and supply power to IEEE802.3af/at compliant Powered Devices (PD). The electrical power and data transmission on the same cable can expand your network to the places where no power lines or outlets, where you can install devices such as APs, IP cameras, or IP phones etc.
The LCD not only can display the PoE work status, accurate judgment port of load,can also help customer and engineer timely
discover and solve the network failure, improve work efficiency and quality.
Features
Interface information
- 16*10/100Mbps RJ45 Ports
- 16 PSE Ports
PoE(Power over Ethernet)
- Complies with IEEE802.3af/at Power over Ethernet
- Supports PoE Power up to 32W for each PoE port
- Auto detect power device
- Remote power and Data feeding up to100m
Switch
- Flow Control for Full Duplex operation and back pressure for Half Duplex Operation
- 8K MAC address, automatic address learning and address aging
- Support LCD display
- Support Energy-Efficient Ethernet (EEE) function (IEEE802.3az)
- Built-in power supply can be chosen by the customer
PoE Features
The OMY-ES316PV can provide up to 32 Watts of power to attached devices, such as VoIP phones, wireless access points, surveillance cameras etc, all over existing cat. 5cables. The switch eliminates the need for individual power sources for devices in the network, saving on costs for power cables and avoiding power outlet availability issues.
LCD Features
OMY-ES316PV with the function of the LCD display and PoE Ethernet switch. The LCD can display the working condition of PoE port not only, still can accurately show the state of each port, such as: Output power, Overload, Short circuit, Light load, Low voltage, Over voltage,High temperature, and so on...
